|
KQ100G高风压潜孔钻机、具有凿岩速度快、（是同类低风压潜孔钻机的一倍以上）钻孔精度高的特点。广泛应用于冶金建材、有色化工、非金属、水电、煤炭、铁路交通等部门的矿山开采及土石方开挖、工程钻凿爆破孔及边坡予裂孔、锚杆锚索孔有独到之处，可钻凿靠边帮孔及水平巾地孔。本机带有液压调平机构、钻孔指示器，以保证钻孔精度。该钻孔机还适应于汽车运输的山坡露天矿境界内采用无段沟开拓工艺钻凿爆破孔的需要。
The equipment has been windly used in open-pit mining and all kind of engineering projects across China. Thanks for its four hydraulic liftsand angle director mounted on, it can drill pre-split hole for precise –controlblasting at ang angle you need, even horizontal hole colsely to the ground. Two times faster than normal and one second of energy saving.
适应岩种：各种硬度岩石 Working mendium All kinds of rocks
钻孔直径：105mm-130mm Hode size mm 105-130
钻孔深度：向下30m 水平40m Hold range m Form vertical toward 30
钻孔方向及角度： Hold range Deg- horizontal 40
横向内外倾角：与地面成30-90度 from horizontal to left and right 30-60
纵向外倾角：与地面成0-90度 from vertical toward 0-90
水平孔高度范围：距地面最高3m Horizontal hole height mm
水平孔最底范围：距地面高度350m max. 3000
推进器补偿：1200mm min 350
推进器一次推进长度：3m Compensative stroke mm 1200
钻具回转速度：38.6r.p.m Feed stroke at once mm 3000
行走速度:1km/h Rotary speed r.p.m 38.6
爬坡: Travel speed km per hour 1
使用风压:0.7-1.2Mpa Climb capability deg. 20
风量:12M3/min Working pressure Mpa 0.7-1.20
除尘:干式[另配] Air consumption cum.p.m 12
配用冲击器:DHD340A DH4 Dust collection echanical(Wet colector is optional)
装机容量:Dirlling tools DH4 DHD 340A CIR90
电压380V Power supply
工作12kw Voltage v 380
行走22kw(电控自行) rotary motor kw 12
机重:9t travel motor kw 22
Gross weight t 9
外形尺寸:长×宽×高(mm) Outside dimensions
750×2580×2810 (L×W×H) mm 7050×2580×2810
接地比压:0.05Mpa Pressure to ground Mpa 0.05
推进轴压:10000N Pushing down forc N 10000
钻杆长度:2000mm Tube length mm 2000
钻杆直径: 76mm tube diameter mm 76
| 
相关资讯
消息